Water Leak Detection Cost Perth

water leak detection cost cover

How much does water leak detection cost in Perth? Good question! Detecting a leak might sound like an easy job – it’s as simple as looking for and identifying the dripping tap, right? Wrong! Leak detection can get extremely complicated, depending on the location of the leak, the cause of the leak, and the property itself.

There are a couple of signs that point to a water leak – if you have noticed your water bill rise dramatically despite no change in water usage practices or wet patches on the floor or walls of your home, then it could be time to look into the detection, and subsequently, water leak detection cost

Detecting a hidden leak is vital to keeping your water costs down and avoiding any unnecessary corrosion or damage to your property. If you think you might have a leak in your home out of sight and are wondering “How much does it cost to detect a water leak?”, then continue reading for our full break down of causes, signs, and costs.

Detecting a Water Leak

Before dialling up a plumber to give you the rundown of the water leak detection cost, the property owner should make an initial investigation of the property. if you suspect a leak but aren’t sure where, there are a couple of places that you can look first to help you figure out how much you’ll need to pay for repairs.

signs you might have a leak

Inside The Home

  • Search the laundry, bathroom(s), and kitchen for any dropping taps or signs of water near appliance connections for washing machines and dishwashers.
  • Toilet cisterns are also a cause for significant leaks. To check this, drop some food colouring in the tank, don’t flush it; if the colour makes it through to the bowl, you may have a leak.

Outside The Home

  • Dripping hoses or outdoor taps and irrigation systems are often places where water can leak outside. 
  • Examine exposed piping outside the home, including those connected to hot water systems. 
  • Any uneven paving zones or areas of the garden that are greener than others can be a sign of a leak below. 

Checking For Leaks Using the Water Meter 

There is also a simple test you can do on your own to confirm you have a leak if all visual cues have been exhausted.

  1. Turn off all your taps and appliances that use water, dishwashers, washing machines, irrigation systems.
  2. Find your water meter. The system is typically at the front of your property.
  3. Find the dials and write down the numbers you see. Some meters may even have a dial to show you when you have a leak.
  4. Don’t use any water for the next 30 minutes.
  5. Check if the last numbers on the dial have changed. If they have, you have a leak. The greater the increase in number, the more significant the leak.

How Much Does It Cost to Detect a Leak?

So, you either suspect or have confirmed a leak, but you have no idea where it is! The next question is a matter of finding it: something that you’ll have to a call in a qualified technician for.

How much will it cost to detect a leak? The total water leak detection cost in Perth can range anywhere from $180 to $300. The final cost is impacted by the nature of the leak, the location, and the equipment required by your plumber. The range in price is determined by several factors, including the leak’s location, the equipment required, and where the property is located.

Factors Influencing Total Water Leak Detection Cost

1. Location

For leaks buried deep underground or in areas with limited access, it will be more complicated for your plumber to diagnose the cause of the leak and subsequently make repairs.

2. Equipment Needed

We use the latest technology to successfully identify and locate leaks. From thermal imaging cameras to acoustic leak detection equipment capable of hearing even the most minuscule of drops, leak detection costs are influenced by the equipment required.

3. Amount Of Leaks

If your property has several leaks, this will impact the time taken on the job to successfully locate each, increasing the fee.

4. Any DIY Work Attempted

If you have attempted to find the leak with any of your own digging or disassembling inside your home, you may face higher water leak detection costs. It is essential you leave the potential leak as untouched as possible to allow the technician the best environment to find leaks efficiently and effectively. The more drawn out this process is, the more costs will increase. 

5. Using an Inexperienced Plumber

Engaging the services on an uncertified or lazy plumber will almost guarantee that leaks are left unchecked, and your issues aren’t fixed. Plumbers without access to proper equipment or lacking adequate training will not be able to conduct thorough searches, meaning you need to call more plumbers and spend more money on leak detection.

6. Distance Travelled

Properties with potential leaks located far from Perth metro may incur an increased call-out fee for water leak detection. The Waterline Plumbing team service many suburbs in and around the Northern Suburbs of Perth. If you are worried about whether your suburb is included, contact us on 0450 334 373 to see if and when we can make it out to you.

Will insurance cover water leak detection cost?

Importance of Detecting a Leak

Now that we have broken down the factors that influence “how much does it cost to detect a water leak?”, let’s look at the importance of having a qualified technician complete the job.

Having a major leak go unnoticed will guarantee that your water leak detection cost is minor compared to the repair costs of severe damage or astronomical water bills. Water leak detection enables property owners to engage a plumber to quickly repair problems before more damage occurs. Water leaks will cause foundational damage to homes and buildings and encourage mould growth. It is imperative that you are constantly monitoring for symptoms of a leak around your home and call in a plumber when you come across the signs and symptoms of water leaks. 

Water Leak Detection with Waterline Plumbing

Looking for the most reasonable water leak detection cost Perth? Waterline Plumbing has you covered. Our fully certified team has the skill, equipment, and experience needed to provide the best water leak detection in Perth. Not only will we determine the cause of your leak, but we will also set about finding a solution for it too. Don’t leave your water leak unattended; get ahead of it as soon as possible. Whether you’re looking for a plumber in Ellenbrook, or elsewhere in the Northern Suburbs, call Waterline Plumbing today on 0450 334 373, or get a free quote online